Advanced features of the EuroWood module:

• The user can create any design and verification type definitions (buckling coefficients, cross-section weakenings, permissible deflection and other parameters), which can then be used in any project.
• The kmod modification factor is adopted automatically based on the group of loads with the greatest impact on the structure in a given combination, or manually based on the user’s decision.
• It is possible to design and verify individual bars, and a group of collinear or almost collinear bars (with an angle change below 5 degrees).
• Internal force envelopes at all characteristic points of the designed element are automatically checked.

EuroWood EN

The module is intended for the design and verification of single-branch, planar and spatial timber constructions.

• Normal and tangential stresses in an element’s cross-section are checked separately.
• The user can additionally perform the design and verification at any indicated points of the element, for all envelopes or for one selected envelope, group or sum of groups.
• The program determines the maximum deflection of an element in a complex state of stress taking into account rheological influences and a possible influence of shear forces, and compares it with the permissible value.
• The design and verification report in the form of manual calculations containing all intermediate results is made in the RTF (MS Word) format.